光興國際

Home > Products > Optical Transceivers > Copper SFP/SFP+ > 1G Copper SFP
1G Copper SFP
Product
Description

The PT4-C0-7D13x-Dx series support SGMII and SerDes, the 1000BASE-T copper small from pluggable (SFP) transceiver is based on the SFP multi source agreement (MSA). The PT4-C0-7D13x-Ax shall support both RX_LOS pin for link indication and 1000BASE-X auto-negotiation.

It is also supporting DDM (Temperature and Voltage) to monitor module via I2C. The transceiver is compliant to RoHS. Its transmission distance at 1Gbps is up to 100m.
  • PT4-C0-7D13K-A3 (白底)_350x233_2020_0716
1G Copper SFP with Hi-Pot Isolation
1G Copper SFP with Hi-Pot Isolation
1G Copper SFP with SyncE and PTP
1G Copper SFP with SyncE and PTP
  • 10/100/1000BASE-T IEEE 802.3 compliant
  • Energy Efficient Ethernet (EEE)-IEEE 802.3az-2010 compliant and Green Ethernet supported
  • Synchronous Ethernet (SyncE) clock recovery and Precise timing Protocol (PTP) time stamping, which is based on IEEE1588 version 2 and  IEEE802.1AS
  • Compliant to Hi-POT test AC1500V / DC2250V
  • Transmission distance at 1.25Gp/s is up to 100m
  • Compact RJ45 connector
  • Case temperature range: 0°C ~ +70°C or -40°C ~ +85°C
  • Low Power Dissipation: Maximum 1.1W
  • Metal enclosure, low EMI
  • Access to Physical Layer IC via 2-wire Serial Bus
  • Support A0 write protection and RX_LOS
  • Wake on LAN (WOL) event detection
  • RoHS compliant
  • 10/100/1000Mbps Ethernet over copper
  • Distributed multi-processing
  • High speed I/O for file server or high-end workstation
  • Switch/Router to Switch/Router Link

Part Number Operating Temperature MAC Interface
PT4-C0-7D13K-D3 0℃ ~ +70℃ SerDes / SGMII
PT4-C0-7D13L-D3 -40℃ ~ +85℃ SerDes / SGMII


** Please feel free to contact info@opto-media.com if any other requirements.
Back to ListBack to Top